MIC4605-1YMT-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFDFN Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-TDFN (2.5x2.5) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 5.5V~16V |
| Base Part Number | MIC4605 |
| Number of Outputs | 2 |
| Output Voltage | 1.9V |
| Max Output Current | 1A |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 5.25V |
| Element Configuration | Dual |
| Nominal Supply Current | 135μA |
| Input Type | Non-Inverting |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| High Side Voltage - Max (Bootstrap) | 108V |
| RoHS Status | ROHS3 Compliant |
MIC4605-1YMT-TR Overview
The 10-UFDFN Exposed Pad package provides greater flexibility.A packaging method of Tape & Reel (TR) is used.For its configuration, it incorporates 2 drivers.Surface Mount is mounted in the way of the device.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 5.5V~16V.N-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is used as the input type.There are various related parts under its base part number MIC4605.Mounting the device requires Surface Mount.The pins are configured with 10 when designing the chip.An output current as high as 1A can be achieved at maximum power.There can be a voltage up to 108V on the high-side (Bootstrap).Mosfet driver is based on a basis of 2 outputs that have been integrated.Operating temperatures cannot exceed 125°C.Temperatures below -40°C are allowed as the minimum.The supply voltage of 16V is its maximum value for operation.The supply voltage of 5.25V is its minimum value for operation.As a result, a voltage of 1.9V is produced.
MIC4605-1YMT-TR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 108V
MIC4605-1YMT-TR Applications
There are a lot of Microchip Technology MIC4605-1YMT-TR gate drivers applications.
- RGB applications
- Broadcast equipment
- Commercial air-conditioning (CAC)
- LCD/LCoS/DLP portable and embedded pico projectors
- High-voltage isolated DC-DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor controllers
- Portable computers
- General Purpose 3-Phase Inverter
- Isolated Supplies for Motor Control
