MIC4802YME
| Parameters | |
|---|---|
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 3V |
| Height | 1.5mm |
| Length | 4.93mm |
| Width | 3.94mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC-EP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Type | Linear |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Lighting |
| Base Part Number | MIC4802 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 800mA |
| Max Supply Current | 800mA |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 800mA |
| Current - Output / Channel | 800mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 500kHz |
MIC4802YME Overview
It saves board space with the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package. This LED driver has 1 outputs.Surface Mount represents this mounting method.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.The LED driver is capable of operating at a temperature of -40°C~125°C TJ.There are considerable benefits for Lighting.There are 8 pins on the base of this LED driver.If the voltage supply is lower than 3V, undetermined failures may occur.It has been mounted on Surface Mount.Under the base part number MIC4802, you'll find this LED driver.5.5V is an acceptable voltage.This value is designed to support a maximum of 5.5V.At its minimal input voltage, it operates at 3V.For highest efficiency, it works with a minimal supply voltage of 3V.In the case of supply current, there is a maximum value of 5.5V.When the maximum supply current is below 800mA, the device can deliver high efficiency.For stable operation, the operating temperature should not exceed 125°C.There is no current available to supply to the load.Maintaining a temperature above -40°C is essential for stabilizing operation.Systems require 5V voltage to operate.As long as the switching frequency is maintained at 500kHz, this electronic component is able to perform all of its functions properly.There are currently 1 channels available for transmission.
MIC4802YME Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Operating with the supply voltage of 5V
Switching frequency of 500kHz
MIC4802YME Applications
There are a lot of Microchip Technology MIC4802YME LED Driver ICs applications.
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Flicker-free LED Lighting using R1580N
- LED backlight driver for LCD displays for portable equipment
- LED headlights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Museum lighting
- Refrigeration lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
