MIC5011YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 4.75V~32V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MIC5011 |
| Max Output Current | 20mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 1.25W |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Turn-Off Delay Time | 4 μs |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 50 μs |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2V 4.5V |
| Length | 9.525mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC5011YN Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.A packaging method of Tube is indicated.There are 1 drivers installed for this device.Through Hole is the way in which it is mounted.By using 4.75V~32V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.Temperature range -40°C~150°C TJ is allowed for this device.Non-Inverting is the input type used in this program.Mosfet driver is based on 8 terminations.There are various related parts under its base part number MIC5011.The mount method is Through Hole.When the device is designed, it has 8 pins.Specification is for 15V supply voltage operation.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.An output current as high as 20mA can be achieved at maximum power.This device has a maximum power dissipation of 1.25W, indicating that it is capable of reducing power loss without overheating.
MIC5011YN Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1.25W
MIC5011YN Applications
There are a lot of Microchip Technology MIC5011YN gate drivers applications.
- Portable Media Players
- Pulse transformer drivers
- Solar power supplies
- High-voltage isolated DC-DC converters
- Line drivers
- Isolated Supplies for Motor Control
- Uninterruptible Power Supplies (UPS)
- Portable Navigation Devices
- Broadcast equipment
- Dual-Battery Systems
