MIC5019YFT-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UDFN Exposed Pad, 4-TMLF® |
| Number of Pins | 4 |
| Supplier Device Package | 4-TQFN (1.2x1.2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2.7V~9V |
| Base Part Number | MIC5019 |
| Number of Outputs | 1 |
| Max Output Current | 150μA |
| Max Supply Voltage | 9V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 150μA |
| Output Current | 10.6μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4.2 ms |
| Turn-Off Delay Time | 60 μs |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC5019YFT-TR Overview
The 4-UDFN Exposed Pad, 4-TMLF? package provides greater flexibility.Gate drivers is packaged in the way of Cut Tape (CT).For its configuration, it incorporates 1 drivers.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 2.7V~9V it is able to demonstrate its superiority.This gate type has a N-Channel MOSFET design.In this device, temperatures must not exceed -40°C~125°C TJ.Non-Inverting is used as the input type.There are various related parts under its base part number MIC5019.Mosfet driver is mounted using the Surface Mount method.The pins are configured with 4 when designing the chip.150μA is the maximum output current.There are 1 outputs integrated for its basis.10.6μA is the maximum output current supported by the device.Mosfet gate drivers is permissible to operate at a temperature of 125°C.-40°C is the minimum permissible operating temperature.During operation, the supply voltage of 9V is its maximum value.This device is designed to operate with a voltage of 2.7V.
MIC5019YFT-TR Features
Embedded in the Cut Tape (CT) package
1 drivers
Employing a gate type of N-Channel MOSFET
4 pins
MIC5019YFT-TR Applications
There are a lot of Microchip Technology MIC5019YFT-TR gate drivers applications.
- Smart Phones
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Uninterruptible Power Supplies (UPS)
- Dual-Battery Systems
- High-speed communications
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor controllers
- Motor Controls
- Solar inverters
- Industrial Motor Inverter - Power Tools, Robotics
