MIC5021YM-TR
| Parameters | |
|---|---|
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 12V~36V |
| Frequency | 150kHz |
| Base Part Number | MIC5021 |
| Number of Outputs | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 12V |
| Nominal Supply Current | 2.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Rise Time | 500ns |
| Fall Time (Typ) | 500 ns |
| Turn-Off Delay Time | 1.5 μs |
| Rise / Fall Time (Typ) | 400ns 400ns |
| Max Frequency | 150kHz |
| Channel Type | Single |
| Number of Drivers | 1 |
MIC5021YM-TR Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) is the packaging method.A total of 1 drivers are integrated into its configuration.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 12V~36V.This gate type has a IGBT, N-Channel MOSFET design.There is a temperature range for this device of -40°C~85°C TA.Non-Inverting is the input type used in this program.Many related parts can be found under its base part number MIC5021.In this case, Surface Mount indicates how the device is to be mounted.During design, it is configured with 8 pins.For its basis, 1 outputs are integrated.85°C is the maximum operating temperature that can be tolerated.There is a minimum operating temperature of -40°C.When the supply voltage is 36V, it is at its maximum operation.A minimum supply voltage of 12V is required for operation.A frequency of 150kHz can improve efficiency.
MIC5021YM-TR Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
MIC5021YM-TR Applications
There are a lot of Microchip Technology MIC5021YM-TR gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- PCMCIA applications
- Dual-Battery Systems
- Solar power supplies
- General Purpose 3-Phase Inverter
- Digitally controlled power supplies
- High current laser/LED systems
- Portable Navigation Devices
- Motor controllers
- Motor Controls
