MIC502YN
| Parameters | |
|---|---|
| Height | 3.43mm |
| Length | 9.65mm |
| Width | 6.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
| Terminal Finish | MATTE TIN |
| Applications | Fan Controller |
| Max Power Dissipation | 740mW |
| Technology | Bipolar |
| Voltage - Supply | 4V~13.2V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 90Hz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC502 |
| Function | Controller - Speed |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 300mV |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Nominal Supply Current | 1.5mA |
| Output Configuration | Pre-Driver - Low Side |
| Power Dissipation | 740mW |
| Output Current | 10mA |
| Collector Emitter Voltage (VCEO) | 13.2V |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
MIC502YN Overview
The package contains [0].There is 8-DIP (0.300, 7.62mm) case included with the part.Ideally, the part should be mounted by Through Hole.The component connected in Fan Controllermatches it perfectly.4V~13.2V volts can be supplied by the device.This device operates at a temperature of -40°C~85°C TA.This motor type can be categorized as Brushless DC (BLDC).A total of 8terminations are available in this part.In order to get the best performance from this amplifier, it should be run at 5V.Through Holeis the recommended mounting method.This can be determined by looking at the MIC502 part number.8pins are used in its design.1outputs are available.Drivers controllers is maintained at 300mV volts.The motor type can be identified as Brushless DC (BLDC).As it has a 10mAoutput current, it provides maximum design flexibility.A frequency of 90Hzcan be achieved.
MIC502YN Features
Applications : Fan Controller
base on MIC502 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
MIC502YN Applications
There are a lot of Microchip Technology MIC502YN motor drivers applications.
- Running preventive- maintenance diagnostics
- RGB and monochromatic LED drivers for signage and traffic signals
- Mobile phone display backlight and key light driving
- Industrial high-bay lights
- Indicator
- LED ballasts
- Alternative to HID lights
- Smart lighting applications
- Dash
- Fog lamps
