MIC5821YN
| Parameters | |
|---|---|
| Number of Outputs | 8 |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Interface | Strobe, Serial |
| Nominal Supply Current | 4.5mA |
| Output Configuration | Low Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 3.5V~15V |
| Switch Type | Latched Driver |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Number of Output Lines | 9 |
| Ambient Temperature Range High | 85°C |
| Height | 3.937mm |
| Length | 19.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MIC5821 |
MIC5821YN Overview
Tube is the way it's packaged.This file is included in package 16-DIP (0.300, 7.62mm).Through Hole is the mounting type of the LED driver.The switch type is Latched Driver.It is best to set the temperature to -55°C~85°C TA to ensure reliable operation.By default, it is set to output 8.In order to operate, it requires a voltage supply of 3.5V~15V.It has a maximum output voltage of Bipolar volts.It belongs to the MIC5821 family.A total of 16 terminations have been recorded.It is necessary to use the 16 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 8.To comply with the operation criteria, the maximum output current is reduced to 500mA.It is possible to obtain high efficiency with a supply voltage of 5V.The lighting driver is mounted in the direction of Through Hole.When this is the case, the output current is set to 500mA.As a whole, there are 1 elements.
MIC5821YN Features
Supplied from 5V
MIC5821YN Applications
There are a lot of Microchip Technology MIC5821YN Power Switches ICs applications.
- PC Card Hot Swap
- Wireless Headsets
- Portable GPS
- Wearable Devices
- HDD, SSD
- USB Protection
- USB Power Distribution
- Low Voltage I/O System Power
- Portable Devices
- Hot Swap
