Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
18-DIP (0.300, 7.62mm) |
Number of Pins |
18 |
Operating Temperature |
-55°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
18 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Technology |
BICMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MIC5841 |
Number of Outputs |
8 |
Output Voltage |
50V |
Output Type |
Bipolar |
Max Output Current |
500mA |
Number of Elements |
1 |
Interface |
Strobe, Serial |
Max Supply Voltage |
12V |
Min Supply Voltage |
5V |
Nominal Supply Current |
16mA |
Output Configuration |
Low Side |
Output Current |
500mA |
Input Type |
Non-Inverting |
Switch Type |
Latched Driver |
Logic Function |
Shift Register |
Direction |
Unidirectional |
Ratio - Input:Output |
1:8 |
Voltage - Load |
15V Max |
Built-in Protections |
TRANSIENT |
Height |
3.3mm |
Length |
23.37mm |
Width |
6.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC5841YN Overview
The package is in the form of a Tube.In the 18-DIP (0.300, 7.62mm) package, it is included.A Through Hole mounting is used for the LED driving board.The switch type of this switch is Latched Driver.Keeping the temperature at -55°C~85°C TA ensures reliable operation.There are 8 outputs available on this lighting driver.The maximum output voltage is Bipolar volts.It is part of the MIC5841 family of LED drivers.A total of 18 terminations have been found in it.The 18 pins are used to operate the LED driver.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 500mA when operation criteria are met.Supply voltages of 5V allow for high efficiency.Through Hole is mounted in the way.As a result, the output current is set to 500mA.12VV is the maximum supply voltage it can handle.It can work with as low a supply voltage as feasible, such as 5VV.As a whole, there are 1 elements.
MIC5841YN Features
Supplied from 5V
MIC5841YN Applications
There are a lot of Microchip Technology MIC5841YN Power Switches ICs applications.
- Hot-Swap Systems
- Wireless Headsets
- Portable/Handheld Devices
- PC Cards
- Notebook PC
- Hot Swap
- Storage Drives
- HDD, SSD
- USB Power Distribution
- Handheld Devices