MIC5841YWM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Supplier Device Package | 18-SOP (Wide) |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC5841 |
| Number of Outputs | 8 |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Interface | Strobe, Serial |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 5V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 16mA |
| Output Configuration | Low Side |
| Output Current | 500mA |
| Number of Bits | 8 |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 15V Max |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Height | 2.39mm |
| Length | 11.66mm |
| Width | 7.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC5841YWM Overview
As a result, it is packaged in the form of a Tube.It's included in the 18-SOIC (0.295, 7.50mm Width) package.In this case, the LED driving board is mounted as Surface Mount.A Latched Driver switch type is owned by it.To ensure reliable operation, the temperature should be set to -55°C~85°C TA.By default, it is set to output 8.There is a maximum output voltage of Bipolar volts.As you can see, it comes from the MIC5841 family.The operation is performed through the 18 pins.From the lighting driver, there is a maximum output of 500mAV.The maximum output current must drop to 500mA to meet the operation criteria.Surface Mount is mounted in the way of this LED driving board.This case results in a 500mA output current.The total number of channels is 1.The maximum operating temperature of 85°C°C allows for stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.12VV is the maximum supply voltage it can handle.A supply voltage of 5VV is sufficient for it to work.A total of 1 elements can be found.
MIC5841YWM Features
1 channels
MIC5841YWM Applications
There are a lot of Microchip Technology MIC5841YWM Power Switches ICs applications.
- PC Card Hot Swap
- Various applications equipped with buttons
- Hot Swap
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- USB Ports/Hubs
- Hot Swaps
- USB Power Distribution
- USB Protection
- Notebook PC
