banner_page

MIC58P01YWM

Bipolar PMIC MIC58P01 24 Pin 24-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC58P01YWM
  • Package: 24-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 462
  • Description: Bipolar PMIC MIC58P01 24 Pin 24-SOIC (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SOIC (0.295, 7.50mm Width)
Number of Pins 24
Supplier Device Package 24-SOIC
Operating Temperature -55°C~125°C TA
Packaging Tube
Published 2007
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC58P01
Number of Outputs 8
Output Type Bipolar
Max Output Current 500mA
Polarity Inverting
Interface Strobe, Parallel
Number of Circuits 1
Max Supply Voltage 15V
Min Supply Voltage 5V
Current - Output (Max) 500mA
Nominal Supply Current 3.3mA
Output Configuration Low Side
Max Output Voltage 80V
Switch Type Latched Driver
Logic Function Latch
Ratio - Input:Output 1:1
Voltage - Load 15V Max
Fault Protection Over Temperature, UVLO
High Level Output Current 500mA
Low Level Output Current 500mA
Number of Input Lines 8
Number of Output Lines 8
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC58P01YWM Overview


As you can see, it's packaged in the way of a Tube.Package 24-SOIC (0.295, 7.50mm Width) contains it.This LED driving board is mounted using the mounting type Surface Mount.There is a Latched Driver switch type associated with it.To ensure reliable operation, the temperature should be set to -55°C~125°C TA.The lighting driver is equipped with 8 outputs that can be used.The maximum output voltage is Bipolar volts.It is part of the MIC58P01 family of LED drivers.The 24 pins are used to operate the LED driver.In this case, the LED driving board can produce only 500mAV as its maximum output.This operation requires the maximum output current to be decreased to 500mA.Surface Mount is mounted in the way of this LED driving board.For stable operation, the maximum operating temperature should be 85°C°C.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.The greatest supply voltage it can handle is 15VV.A supply voltage of 5VV is sufficient for it to work.

MIC58P01YWM Features



MIC58P01YWM Applications


There are a lot of Microchip Technology MIC58P01YWM Power Switches ICs applications.

  • Storage (HDDs, SSDs)
  • PC Cards
  • Hard Disk Drives
  • Solid-State Drives
  • Solid State Drivers
  • HDD, SSD
  • Portable/Handheld Devices
  • Smart Phones, Feature Phones
  • Portable Music Players
  • Low Voltage I/O System Power

Write a review

Note: HTML is not translated!
    Bad           Good