MIC58P42YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MIC58P42 |
| Number of Outputs | 8 |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | Non-Inverting |
| Interface | Strobe, Serial |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 5V |
| Nominal Supply Current | 6.4mA |
| Output Configuration | Low Side |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 5V~12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.445mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC58P42YN Overview
Tube is the way it's packaged.Package 18-DIP (0.300, 7.62mm) contains it.The LED driver is mounted as Through Hole.Latched Driver is the switch type it owns.It is recommended that the temperature be set to -55°C~125°C TA for reliable performance.The lighting driver has a total of 8 outputs that are available for use.The maximum output voltage of this LED driver is Bipolar volts.The MIC58P42 family consists of this type.A total of 18 terminations can be found in it.It is necessary to use the 18 pins in order to operate the LED driver.The LED driving board has a total of 8 functions.In order to meet the operation criteria, the maximum output current drops to 500mA.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The lighting driver is mounted in the direction of Through Hole.There is a maximum voltage of 12VV that it can handle.It can also be used at 5Vvolts if needed.
MIC58P42YN Features
Supplied from 5V
MIC58P42YN Applications
There are a lot of Microchip Technology MIC58P42YN Power Switches ICs applications.
- Wireless/Networking Cards
- Portable/Handheld Devices
- PC Card Hot Swap
- Smart Phones, Feature Phones
- Notebook and Tablet Computers
- Wearable Devices
- Solid-State Drives
- Wireless Headsets
- Wireless Modem Data Cards
- Hot Swaps
