MIC59P50YWM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Power Rating | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MIC59P50 |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | Inverting |
| Interface | Strobe, Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 5V |
| Nominal Supply Current | 6.4mA |
| Output Configuration | Low Side |
| Output Current | 500mA |
| Max Output Voltage | 80V |
| Switch Type | Latched Driver |
| Logic Function | Latch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| High Level Output Current | 500mA |
| Low Level Output Current | 500mA |
| Number of Output Lines | 8 |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.64mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC59P50YWM Overview
As a result, it is packaged in the form of a Tube.This package is included in 24-SOIC (0.295, 7.50mm Width).The mounting type of the LED driver is Surface Mount.It owns the Latched Driver switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The maximum output voltage is Bipolar volts.The lighting driver has Status Flag features.It is part of the MIC59P50 family of LED drivers.It contains 24 terminations.The operation is performed through the 24 pins.It has 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.Using a voltage of 5V allows for high efficiency.This lighting driver is mounted in the way of Surface Mount.When this is the case, the output current is set to 500mA.15VV is the maximum supply voltage it can handle.It can work with as low a supply voltage as feasible, such as 5VV.
MIC59P50YWM Features
Supplied from 5V
MIC59P50YWM Applications
There are a lot of Microchip Technology MIC59P50YWM Power Switches ICs applications.
- HDD and SSD
- Portable GPS
- PDAs
- Hot Swap
- Portable GPS Device
- Hot Swap
- HDD, SSD
- Portable Music Players
- Notebook PC
- USB Ports/Hubs
