MIC59P60YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | TTL AND CMOS COMPATIBLE INPUTS |
| Power Rating | 2W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MIC59P60 |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | Inverting |
| Interface | Strobe, Serial |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 5V |
| Nominal Supply Current | 6.4mA |
| Output Configuration | Low Side |
| Max Output Voltage | 80V |
| Switch Type | Latched Driver |
| Logic Function | Latch, Shift Register |
| Output Characteristics | OPEN-COLLECTOR |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 5V~12V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| High Level Output Current | 500mA |
| Low Level Output Current | 500mA |
| Number of Output Lines | 8 |
| Built-in Protections | UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.7mm |
| Length | 25.9mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC59P60YN Overview
The LED driver's packaged as a Tube.There is a package for it in the 20-DIP (0.300, 7.62mm) package.The LED driver is mounted as Through Hole.There is a Latched Driver switch type associated with it.To ensure reliable operation, set the temperature to -40°C~85°C TA.A maximum voltage of Bipolar volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Status Flag.The MIC59P60 family consists of this type.It consists of 20 terminations in total.The 20 pins are used to operate the LED driver.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.A supply voltage of 5V leads to high efficiency.As a result, it is mounted in the manner of Through Hole.In addition, TTL AND CMOS COMPATIBLE INPUTS can be produced using this LED driving board.There is a maximum voltage of 15VV that it can handle.It can operate at low supply voltages, such as 5V volts.
MIC59P60YN Features
Supplied from 5V
Additional features like TTL AND CMOS COMPATIBLE INPUTS
MIC59P60YN Applications
There are a lot of Microchip Technology MIC59P60YN Power Switches ICs applications.
- Notebook PC
- Telecom and Network Systems
- Set-Top Boxes
- HDD, SSD
- Wearable Devices
- Hard Disk Drives
- Notebook and Tablet Computers
- USB Ports/Hubs
- USB Protection
- Solid-State Drives
