MIC6270YM5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | IttyBitty® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC6270 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 900μA |
| Output Current | 20mA |
| Max Supply Current | 1.2mA |
| Quiescent Current | 1.2mA |
| Response Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 400μA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 15V |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 1.2mA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Natural Thermal Resistance | 220 °C/W |
| Current - Output (Typ) | 20mA @ 5V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC6270YM5-TR Overview
The product is packaged in SC-74A, SOT-753 in order to facilitate transportation.The comparator has a CMOS, DTL, ECL, MOS, Open-Collector, TTL output.The part is shipped by Tape & Reel (TR) .When it comes to types, this comparator is a typical General Purpose .In total, it contains 1 elements.The recommended mounting type is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 5 pins on the comparator.Try search MIC6270 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 1.2mA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 900μA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1.2mA .Electronic comparator is possible to input up to 250nA current into the device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.Temperature higher than 85°C is not recommended.Temperatures below -40°C are not suitable for the device.The comparator has a maximum supply voltage of 36V .A voltage of 2V is the minimum supply voltage allowed by this comparator.1 channels cooperate together to maintain the output quality.The part is based on IttyBitty? .
MIC6270YM5-TR Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2mA
Voltage Gain: 106.02dB
MIC6270YM5-TR Applications
There are a lot of Microchip Technology MIC6270YM5-TR linear comparators applications.
- Infotainment and Clusters
- Power Supervision
- High-Speed Sampling Circuits
- System control and monitoring
- Battery management and protection
- Mobile Communications
- Automatic Test Equipment
- Mobile Phones and Tablets
- Set Top Boxes
- Battery-Powered Electronics
