MIC7211YM5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | IttyBitty® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC7211 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.2V |
| Nominal Supply Current | 14μA |
| Max Supply Current | 25μA |
| Propagation Delay | 5 μs |
| Quiescent Current | 25μA |
| Response Time | 5 μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.2V~10V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 10mV |
| Voltage Gain | 125dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Input Current | 500 fA |
| Input Bias Current | 500 fA |
| Current - Quiescent (Max) | 25μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 0.5pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR, 90dB PSRR |
| Natural Thermal Resistance | 235 °C/W |
| Propagation Delay (Max) | 5μs |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC7211YM5-TR Overview
For convenience, it is packaged in SC-74A, SOT-753 .The comparator has a type Push-Pull output.This device is designed in Tape & Reel (TR) case.Speaking of types, this is a typical General Purpose comparator.There are a total of 1 elements in it.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.5 pins are available on the comparator.If you require more pin-to-pin solutions, search MIC7211 for more options.There is a quiescent current of 25μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 14μA in order to use the device normally.A current supply greater than 25μA may result in the comparator malfunctioning.A maximum current of 500 fA can be supplied to the device.A voltage gain of 125dB can be determined from the voltage formula for the part.In general, temperatures higher than 85°C are not recommended.Lower temperatures than -40°C are unsuitable for it.A comparator's maximum supply voltage is 10V volts.Using a voltage as low as 2.2V is possible for this comparator.As a result, 1 channels work together to maintain the quality of the output.The part belongs to the IttyBitty? series of comparator parts.
MIC7211YM5-TR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 25μA
Voltage Gain: 125dB
MIC7211YM5-TR Applications
There are a lot of Microchip Technology MIC7211YM5-TR linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- RC Timers
- Building automation
- Infotainment and Clusters
- Analog front end
- Automotive
- DC/DC and AC/DC power supplies
- Portable Battery Monitoring
- General-Purpose, Low-Voltage Applications
- Battery management and protection
