banner_page

MIC7221YM5-TR

Surface Mount Tape & Reel (TR) 5 μs μs Linear Comparators 125dB dB 500 fA pA 14μA μA 10mV mV Surface Mount


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC7221YM5-TR
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 288
  • Description: Surface Mount Tape & Reel (TR) 5 μs μs Linear Comparators 125dB dB 500 fA pA 14μA μA 10mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Supplier Device Package SOT-23-5
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series IttyBitty®
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC7221
Output Type Open Drain
Number of Elements 1
Number of Channels 1
Max Supply Voltage 10V
Min Supply Voltage 2.2V
Nominal Supply Current 14μA
Max Supply Current 25μA
Propagation Delay 5 μs
Quiescent Current 25μA
Response Time 5 μs
Common Mode Rejection Ratio 70 dB
Voltage - Supply, Single/Dual (±) 2.2V~10V
Output Current per Channel 100mA
Input Offset Voltage (Vos) 10mV
Voltage Gain 125dB
Power Supply Rejection Ratio (PSRR) 90dB
Max Input Current 500 fA
Input Bias Current 500 fA
Current - Quiescent (Max) 25μA
Voltage - Input Offset (Max) 10mV @ 5V
Current - Input Bias (Max) 0.5pA @ 5V
CMRR, PSRR (Typ) 70dB CMRR, 90dB PSRR
Natural Thermal Resistance 235 °C/W
Propagation Delay (Max) 5μs
Height 1.3mm
Length 2.9mm
Width 1.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC7221YM5-TR Overview


A convenient packaging is provided in the form of SC-74A, SOT-753 .This comparator is of the Open Drain output type.This chip is designed with the Tape & Reel (TR) package.In terms of type, this is a typical General Purpose comparator.Electronic comparator consists of 1 elements in total.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 5 pins on the comparator.You may wish to search MIC7221 for more solutions that address your specific needs.The comparator displays a quiescent current of 25μA .Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current be 14μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 25μA .There is a maximum current that can be input into the device of 500 fA .According to the voltage formula, the part has a voltage gain of 125dB .In general, temperatures higher than 85°C are not recommended.Comparator electronics will not be able to function at temperatures below -40°C .A comparator is designed to operate at a maximum supply voltage of 10V .A minimum supply voltage of 2.2V is allowed for this comparator.To maintain the output quality, 1 channels work together.The part is from IttyBitty? comparator series.

MIC7221YM5-TR Features


Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 25μA
Voltage Gain: 125dB

MIC7221YM5-TR Applications


There are a lot of Microchip Technology MIC7221YM5-TR linear comparators applications.

  • Automatic Test Equipment
  • Hand-Held Electronics
  • General-Purpose Portable Devices
  • Pulse, Squarewave, and Time Delay Generators
  • Limit Comparators
  • Alarm and Monitoring Circuits
  • RC Timers
  • Self-diagnostics
  • Simple Analog-to-Digital Converters (ADCs)
  • Battery-Powered Electronics

Write a review

Note: HTML is not translated!
    Bad           Good