MIC7300YM5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | IttyBitty® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC7300 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.2V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 2mA |
| Current - Supply | 1.5mA |
| Slew Rate | 0.5V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~10V ±1.1V~5V |
| Output Current per Channel | 115mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 550 kHz |
| Gain Bandwidth Product | 370kHz |
| Voltage Gain | 110.63dB |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Voltage - Input Offset | 1mV |
| Current - Output / Channel | 115mA |
| Max Junction Temperature (Tj) | 85°C |
| Number of Amplifiers | 1 |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC7300YM5-TR Overview
Op amp is packaged in SC-74A, SOT-753 case. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. 5 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . A supply current of 1.5mA can be used to operate this linear amplifier. 110.63dB should remain the voltage gain. There are 1 circuits on op amps. Instrumentation amplifier has 1 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Use op amp only at temperatures no higher than 85°C. As a whole, there are 1 elements that make up this buffer amplifier. In order to ensure optimal performance, an 1.5mA supply is recommended for this electrical component. With regard to the supply voltage, this electrical component is capable of working from under 10V. As a general rule, it is advisable to keep the op amp's supply voltage above 2.2V at all times. The IttyBitty? represents the op amp's series number. A linear amplifier such as this has 1 amplifiers on it.
MIC7300YM5-TR Features
110.63dB voltage gain
Output Type: Rail-to-Rail
MIC7300YM5-TR Applications
There are a lot of Microchip Technology MIC7300YM5-TR Instrumentational OP Amps applications.
- Weighing systems
- Power generator
- Radiation thermometry transducers
- Band-stop filter
- Industrial control system
- Laptop
- Medical imaging
- ECG equipment
- Multimedia playback equipment
- Commercial audio systems
