MIC826MYMT-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | Simple Reset/Power-On Reset |
| Additional Feature | THRESHOLD VOLTAGE= 4.375 V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MIC826 |
| Output | Push-Pull, Totem Pole |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 4.8μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.309V |
| Max Reset Threshold Voltage | 4.441V |
| Reset Delay Time | 10 μs |
| Height | 500μm |
| Length | 1.6mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC826MYMT-T5 Overview
As you can see, this power management is mounted through 6 terminals. There is a Cut Tape (CT)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. Please find attached 6-UFDFN Exposed Pad functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. A supply voltage of 5V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. This power management has 6 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~125°C TJ. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 20mA supply current present in the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. For similar manage ics search of the manufacturer, you can always refer to MIC826, the base PMIC number.
MIC826MYMT-T5 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20mA operating supply current
MIC826MYMT-T5 Applications
There are a lot of Microchip Technology MIC826MYMT-T5 Voltage Supervisors applications.
- Radar
- Sensitive sensors
- Household appliances
- Cloud computing
- DC stabilized power supply module
- Power distribution systems of ICU
- Military communications
- Important electronics for automotive safety
- Computer applications
- Detection of phase loss
