MIC826SYMT-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | Simple Reset/Power-On Reset |
| Additional Feature | THRESHOLD VOLTAGE= 2.925 V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MIC826 |
| Output | Push-Pull, Totem Pole |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 3.8μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.881V |
| Max Reset Threshold Voltage | 2.969V |
| Reset Delay Time | 10 μs |
| Height | 500μm |
| Length | 1.6mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC826SYMT-T5 Overview
A total of 6 terminals are used to mount this power management. A Cut Tape (CT) package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find 6-UFDFN Exposed Pad functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. When a supply voltage of 3.3V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. 6 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TJ. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 20mA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use MIC826, the base supervisor number, to search for similar PMICs of the manufacturer.
MIC826SYMT-T5 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20mA operating supply current
MIC826SYMT-T5 Applications
There are a lot of Microchip Technology MIC826SYMT-T5 Voltage Supervisors applications.
- Household appliances
- Magnetic resonance imaging
- Insulation fault location system
- Battery-powered equipment
- Microcontroller system
- Multi-voltage system
- Power communication system
- Digitally controlled LDO regulators circuit
- Kitchen appliances
- Sensitive sensors
