banner_page

MIC826TYMT-TR

6 Terminals MIC826 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC826TYMT-TR
  • Package: 6-UFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 566
  • Description: 6 Terminals MIC826 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Type Simple Reset/Power-On Reset
Additional Feature THRESHOLD VOLTAGE 3.075
Terminal Position DUAL
Terminal Form NO LEAD
Number of Functions 1
Terminal Pitch 0.5mm
Base Part Number MIC826
Output Push-Pull, Totem Pole
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Adjustable Threshold NO
Reset Active High/Active Low
Voltage - Threshold 3.075V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Reset Delay Time 10 μs
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-UFDFN Exposed Pad
Number of Pins 6
Manufacturer Package Identifier MIC826TYMT-TR
Operating Temperature -40°C~125°C TJ
Packaging Cut Tape (CT)
Published 2016

MIC826TYMT-TR Overview


There are 6 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Cut Tape (CT). Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of 6-UFDFN Exposed Pad functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by a Surface Mount-axis. Pin count of the power management is 6. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. Power management has an output of Push-Pull, Totem Pole during operation. There are other features such as THRESHOLD VOLTAGE 3.075 to name a few. A similar IC managements number of the manufacturer can always be found by using MIC826, the base power ics number.

MIC826TYMT-TR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MIC826TYMT-TR Applications


There are a lot of Microchip Technology MIC826TYMT-TR Voltage Supervisors applications.

  • Detection of phase loss
  • DVR
  • Military electronics
  • Battery-powered equipment
  • Unattended substation automation
  • Functional modules
  • WiFi router
  • Household appliances
  • Computer applications
  • Magnetic resonance imaging

Write a review

Note: HTML is not translated!
    Bad           Good