MIC841LYC5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Supplier Device Package | SC-70-5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Teeny™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | with Voltage Reference |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC841 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Nominal Supply Current | 3μA |
| Output Current | 20mA |
| Max Supply Current | 10nA |
| Propagation Delay | 50 μs |
| Quiescent Current | 3μA |
| Response Time | 12 μs |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 20mA |
| Current - Quiescent (Max) | 3μA |
| Hysteresis | 20mV |
| Natural Thermal Resistance | 256.5 °C/W |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 12μs |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC841LYC5-TR Overview
For convenience, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .Output type Push-Pull is used for this comparator.This device is designed in Tape & Reel (TR) case.Electronic comparator is possible to classify the chip as with Voltage Reference .In total, it contains 1 elements.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 5 pins on the comparator.You can search MIC841 if you are looking for more pin-to-pin solutions.There is a quiescent current of 3μA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 3μA .A current supply greater than 10nA may cause the comparator to malfunction.Comparator electronics is not recommended to operate at a temperature higher than 85°C .Comparator electronics is not suComparator electronicsable for temperatures below -40°C .A comparator is designed to operate at a maximum supply voltage of 5.5V .A minimum supply voltage of 1.5V is permitted for this comparator.For the output to be of high quality, 1 channels must cooperate together.Comparator electronics is part of the Teeny? comparator series.For normal operation, there should be 5V operating supply voltage applied.
MIC841LYC5-TR Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3μA
MIC841LYC5-TR Applications
There are a lot of Microchip Technology MIC841LYC5-TR linear comparators applications.
- High-Speed Sampling Circuits
- Multivibrators and High-Voltage Digital Logic Gates
- Automatic Test Equipment
- Building automation
- Mobile Phones
- Portable Battery Monitoring
- Window Comparators
- Current and voltage sensing
- Point of load regulators
- Wide Range VCO; MOS Clock Timers
