MIC841NYC5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Supplier Device Package | SC-70-5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Teeny™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | with Voltage Reference |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC841 |
| Output Type | Open Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Nominal Supply Current | 10nA |
| Output Current | 20mA |
| Max Supply Current | 10nA |
| Propagation Delay | 50 μs |
| Quiescent Current | 3μA |
| Turn On Delay Time | 50 μs |
| Response Time | 12 μs |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 20mA |
| Current - Quiescent (Max) | 3μA |
| Hysteresis | 20mV |
| Natural Thermal Resistance | 256.5 °C/W |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 12μs |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC841NYC5-TR Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 to facilitate transportation.The comparator has an output type of Open Drain .Electronic comparator is shipped by Tape & Reel (TR) .Speaking of types, this is a typical with Voltage Reference comparator.Currently, it consists of only 1 elements.In general, mounting type Surface Mount is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator has 5 pins.In case you are looking for more pin-to-pin solutions, you may want to search MIC841 .In this comparator, the quiescent current is 3μA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 10nA in order to use the device normally.The compartator could be damaged if the current supply exceeds 10nA .Keeping the temperature below 85°C is not recommended.Lower temperatures than -40°C are unsuitable for it.Compatibility is defined as 5.5V when the comparator is operating at its maximum supply voltage.There is a minimum supply voltage of 1.5V for this comparator.For the output to be of high quality, 1 channels must cooperate together.This part is from the Teeny? comparator series.For normal operation, the operating supply voltage must be 5V .
MIC841NYC5-TR Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3μA
MIC841NYC5-TR Applications
There are a lot of Microchip Technology MIC841NYC5-TR linear comparators applications.
- Factory automation & control
- General-Purpose, Low-Voltage Applications
- Current and voltage sensing
- Lithium ion battery monitoring
- Handheld Instruments
- Multivibrators and High-Voltage Digital Logic Gates
- General-Purpose Portable Devices
- Threshold Detectors
- High-Speed Differential Line Receiver
- Battery-Powered Electronics
