Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Supplier Device Package |
SC-70-5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Series |
Teeny™ |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
with Voltage Reference |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Base Part Number |
MIC842 |
Output Type |
Push-Pull |
Number of Elements |
1 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.5V |
Nominal Supply Current |
3μA |
Output Current |
20mA |
Propagation Delay |
50 μs |
Quiescent Current |
3μA |
Response Time |
12 μs |
Voltage - Supply, Single/Dual (±) |
1.5V~5.5V |
Current - Quiescent (Max) |
3μA |
Hysteresis |
20mV |
Natural Thermal Resistance |
256.5 °C/W |
Current - Output (Typ) |
20mA |
Propagation Delay (Max) |
12μs |
Height |
1mm |
Length |
2.2mm |
Width |
1.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC842HYC5-TR Overview
A convenient packaging is provided in the form of 5-TSSOP, SC-70-5, SOT-353 .Output type Push-Pull is used for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .Speaking of types, this is a typical with Voltage Reference comparator.Currently, it consists of only 1 elements.In general, mounting type Surface Mount is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 5 pins.You can search MIC842 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 3μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .For normal use of the device, the nominal supply current should be 3μA .An increase in temperature over 85°C is not recommended.Temperatures below -40°C are not suitable for the device.The comparator has a maximum supply voltage of 5.5V .A minimum supply voltage of 1.5V is allowed for this comparator.As a result, 1 channels work together to maintain the quality of the output.The part is based on Teeny? .
MIC842HYC5-TR Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3μA
MIC842HYC5-TR Applications
There are a lot of Microchip Technology MIC842HYC5-TR linear comparators applications.
- Limit Comparators
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Infotainment and Clusters
- Wireless Base Stations
- High-Speed Sampling Circuits
- Threshold Detectors
- High-Speed Differential Line Receiver
- Motor drives
- Battery management and protection