banner_page

MIC842LYC5-TR

Surface Mount Tape & Reel (TR) 20mA mA 12 μs μs Linear Comparators 3μA μA Surface Mount


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC842LYC5-TR
  • Package: 5-TSSOP, SC-70-5, SOT-353
  • Datasheet: PDF
  • Stock: 955
  • Description: Surface Mount Tape & Reel (TR) 20mA mA 12 μs μs Linear Comparators 3μA μA Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 5-TSSOP, SC-70-5, SOT-353
Number of Pins 5
Supplier Device Package SC-70-5
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series Teeny™
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type with Voltage Reference
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC842
Output Type Push-Pull
Number of Elements 1
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.5V
Nominal Supply Current 3μA
Output Current 20mA
Max Supply Current 10nA
Propagation Delay 50 μs
Quiescent Current 3μA
Turn On Delay Time 50 μs
Response Time 12 μs
Voltage - Supply, Single/Dual (±) 1.5V~5.5V
Output Current per Channel 20mA
Current - Quiescent (Max) 3μA
Hysteresis 20mV
Natural Thermal Resistance 256.5 °C/W
Current - Output (Typ) 20mA
Propagation Delay (Max) 12μs
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC842LYC5-TR Overview


To facilitate transportation, it comes packaged in 5-TSSOP, SC-70-5, SOT-353 .Output type of this comparator is Push-Pull .As a result, it is designed with Tape & Reel (TR) package.This is a typical comparator of type with Voltage Reference .This element consists of 1 elements in total.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has 5 pins.You can find more pin-to-pin solutions for your special requirements by searching MIC842 .The comparator presents a quiescent current of 3μA volts.There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 3μA when using the device.An excess of current supply over 10nA could result in malfunction of the comparator.Comparator electronics is not recommended to maintain a temperature above 85°C .A temperature lower than -40°C is unsuitable for the device.A comparator's maximum supply voltage is 5.5V volts.There is a minimum supply voltage of 1.5V for this comparator.As a result, 1 channels work together to maintain the quality of the output.The part belongs to the Teeny? series of comparator parts.

MIC842LYC5-TR Features


Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3μA

MIC842LYC5-TR Applications


There are a lot of Microchip Technology MIC842LYC5-TR linear comparators applications.

  • Motor drives
  • Zero-Crossing Detectors
  • Window Comparators
  • General Purpose Low Voltage Applications
  • Battery-Powered Electronics
  • Multivibrators and High-Voltage Digital Logic Gates
  • Notebooks and PDAs
  • Mobile Communications
  • Infotainment and Clusters
  • Point of load regulators

Write a review

Note: HTML is not translated!
    Bad           Good