MIC842NYC5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Supplier Device Package | SC-70-5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Teeny™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | with Voltage Reference |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC842 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Nominal Supply Current | 3μA |
| Output Current | 20mA |
| Max Supply Current | 3μA |
| Propagation Delay | 50 μs |
| Quiescent Current | 3μA |
| Response Time | 12 μs |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Current - Quiescent (Max) | 3μA |
| Hysteresis | 20mV |
| Natural Thermal Resistance | 256.5 °C/W |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 12μs |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC842NYC5-TR Overview
To facilitate transportation, it comes packaged in 5-TSSOP, SC-70-5, SOT-353 .There is a Open Drain output type for this comparator.Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to classify the chip as with Voltage Reference .A total of 1 elements can be found in it.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.5 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MIC842 .A quiescent current of 3μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 3μA .A supply current exceeding 3μA may result in the comparator malfunctioning.An increase in temperature over 85°C is not recommended.A temperature lower than -40°C is unsuitable for the device.5.5V is the maximum supply voltage of the comparator.A minimum supply voltage of 1.5V is allowed for this comparator.In order to maintain the quality of the output, 1 channels cooperate together.Comparator electronics is part of the Teeny? comparator series.
MIC842NYC5-TR Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3μA
MIC842NYC5-TR Applications
There are a lot of Microchip Technology MIC842NYC5-TR linear comparators applications.
- Wearable Devices
- RC Timers
- Point of load regulators
- Laptop Computers
- System control and monitoring
- Appliances
- Infotainment and Clusters
- Portable Battery Monitoring
- Battery management and protection
- Automatic Test Equipment
