MIC94042YFLTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | DFN |
| Number of Pins | 4 |
| Packaging | Cut Tape |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 4 |
| Resistance | 55MOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 3A |
| Number of Outputs | 1 |
| Max Output Current | 3A |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 3A |
| Current | 3A |
| Output Configuration | High Side |
| Current - Output | 3A |
| Nominal Input Voltage | 5.5V |
| Turn On Time | 0.2 µs |
| Height | 700μm |
| Length | 1.2mm |
| Width | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MIC94042YFLTR Overview
In the DFN package you will find it.Cut Tape-shaped packaging is used.Total terminations are 4.Device QUAD is located at the terminal position.A supply voltage of 2.5V allows for high efficiency.Operating the device requires 4 pins.Surface Mount is the direction in which it is positioned.For stable operation, the maximum operating temperature should be 125°C°C.The system must function at a minimum temperature of -40°C degrees Celsius in order to maintain its reliability.By default, output 1 is selected.In order to satisfy the operation criteria, the maximum output current must drop to 3A.There is a 55MOhm resistance on this device.
MIC94042YFLTR Features
MIC94042YFLTR Applications
There are a lot of Micrel MIC94042YFLTR hot swap controllers applications.
- Overvoltage protection
- Switch
- Network router
- Distributed power systems
- Undervoltage protection
- Storage network
- Redundant negative voltage supplies
- Current monitoring
- Power supply hotswap & inrush control
- DC boost circuit
