banner_page

MIC94043YFL-TR

P-Channel 0.65mm PMIC MIC94043 4 Pin 2.5V 4-WQFN, 4-MLF?


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC94043YFL-TR
  • Package: 4-WQFN, 4-MLF®
  • Datasheet: PDF
  • Stock: 731
  • Description: P-Channel 0.65mm PMIC MIC94043 4 Pin 2.5V 4-WQFN, 4-MLF? (Kg)

Details

Tags

Parameters
Voltage - Load 1.7V~5.5V
Turn On Time 0.2 μs
Rds On (Typ) 28m Ω
Height 750μm
Length 1.2mm
Width 1.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-WQFN, 4-MLF®
Number of Pins 4
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
Published 2008
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
Resistance 28mOhm
Terminal Position QUAD
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Current Rating 3A
Base Part Number MIC94043
Number of Outputs 1
Output Type P-Channel
Max Output Current 3A
Interface On/Off
Nominal Supply Current 3A
Output Configuration High Side
Output Current 3A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1

MIC94043YFL-TR Overview


It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in 4-WQFN, 4-MLF?.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.It comes under the family of MIC94043.It contains 4 terminations.The 4 pins are used for the operation of the system.The LED driving board has a total of 1 functions.The maximum output current must drop to 3A to meet the operation criteria.Using a voltage of 2.5V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.The LED driver has 28mOhm resistance.The output current is set to 3A in this case.This LED driver can handle voltages up to 5.5V volts.The minimum input voltage is 1.7V volts.

MIC94043YFL-TR Features


Supplied from 2.5V
Resistance of 28mOhm

MIC94043YFL-TR Applications


There are a lot of Microchip Technology MIC94043YFL-TR Power Switches ICs applications.

  • PC Cards
  • Solid-State Drives
  • Portable Devices
  • Various applications equipped with buttons
  • Wearable Devices
  • Portable Video Game Players
  • Wireless Modem Data Cards
  • Portable GPS
  • Telecom and Network Systems
  • Hot Swaps

Write a review

Note: HTML is not translated!
    Bad           Good