MIC94044YFL-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-WDFN, 4-MLF® |
| Number of Pins | 4 |
| Supplier Device Package | 4-MLF® (1.2x1.2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Digi-Reel® |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 280mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Current Rating | 3A |
| Base Part Number | MIC94044 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 3A |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Current | 6A |
| Output Configuration | High Side |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.7V~5.5V |
| Rds On (Typ) | 28mOhm |
| Height | 700μm |
| Length | 1.2mm |
| Width | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC94044YFL-TR Overview
As a result, it is packaged in the form of a Digi-Reel?.It is included in the package 4-WDFN, 4-MLF?.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of P-Channel volts can be achieved by this LED driver.The lighting driver has Slew Rate Controlled features.It comes under the family of MIC94044.In order to operate, 4 pins are used.This lighting driver is capable of delivering a maximum output of 3A volts.To meet the operation criteria, the maximum output current drops to 3A.The lighting driver is mounted in the direction of Surface Mount.280mOhm resistance is present in the lighting driver.In this case, the output current is set to 3A.There are a total of 1 available channels.It is suitable for stable operation to operate at a maximum temperature of 125°C°C.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.
MIC94044YFL-TR Features
Resistance of 280mOhm
1 channels
MIC94044YFL-TR Applications
There are a lot of Microchip Technology MIC94044YFL-TR Power Switches ICs applications.
- Handheld Devices
- Wireless/Networking Cards
- Portable Music Players
- Set-top-box
- PC Card Hot Swap
- USB Power Distribution
- Set-Top Boxes
- HDD, SSD
- Wearable Devices
- Notebook and Tablet Computers
