MIC94060YMT-TR
| Parameters | |
|---|---|
| Min Operating Temperature | -40°C |
| Current Rating | 6A |
| Base Part Number | MIC94060 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.7V |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.2 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 200 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.7V~5.5V |
| Rds On (Typ) | 85mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad, 4-TMLF® |
| Number of Pins | 4 |
| Supplier Device Package | 4-TMLF® (1.2x1.6) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 225mOhm |
| Max Operating Temperature | 125°C |
MIC94060YMT-TR Overview
The package is in the form of a Tape & Reel (TR).It's included in the 4-UFDFN Exposed Pad, 4-TMLF? package.This lighting drivere has a mounting type of Surface Mount.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TA.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.It belongs to the family MIC94060.It is necessary to use the 4 pins in order to operate the LED driver.The LED driver output is limited to 2AV.The maximum output current drops to 2A in order to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Currently, the LED driving board has 225mOhm resistance.This results in a 2A output current.In order to ensure stable operation, a maximum operating temperature of 125°C°C should be maintained.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.As a result, it is only capable of handling voltages up to 5.5VV.Alternatively, 1.7V volts can be used if needed.
MIC94060YMT-TR Features
Resistance of 225mOhm
MIC94060YMT-TR Applications
There are a lot of Microchip Technology MIC94060YMT-TR Power Switches ICs applications.
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- PC Card Hot Swap
- Hot Swap
- Mobile Communication Devices
- Various applications equipped with buttons
- Solid State Drivers
- Hot-Swap Systems
- Solid-State Drives
- Portable GPS
