MIC94061YC6-TR
| Parameters | |
|---|---|
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Supplier Device Package | SC-70-6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Feature | Load Discharge |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 77mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Current Rating | 2A |
| Base Part Number | MIC94061 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.7V~5.5V |
| Rds On (Typ) | 77mOhm |
| Height | 1mm |
MIC94061YC6-TR Overview
It is packaged in the form of a Tape & Reel (TR).Package 6-TSSOP, SC-88, SOT-363 contains it.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TA.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.It has a maximum output voltage of P-Channel volts.Currently, the LED driving board is equipped with Load Discharge features.The MIC94061 family contains this object.The operation is carried out using the 6 pins.This LED driver has a maximum output of 2AV.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.It is mounted in the way of Surface Mount.The LED driver has 77mOhm resistance.In this case, the output current is set to 2A.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.A maximum input voltage of 5.5V volts can be applied to it.The input voltage minimum is 1.7V volts.Keeping the operating temperature at 125°C°C ensures stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.There are 1 inputs available.
MIC94061YC6-TR Features
Resistance of 77mOhm
MIC94061YC6-TR Applications
There are a lot of Microchip Technology MIC94061YC6-TR Power Switches ICs applications.
- Portable Music Players
- USB3.1 Power Delivery
- Wireless Modem Data Cards
- Wearable Devices
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Notebook and Tablet Computers
- Wireless Headsets
- Hot-Swap Systems
- USB Power Distribution
