MIC94062YC6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Supplier Device Package | SC-70-6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 77mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Current Rating | 2A |
| Base Part Number | MIC94062 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.7V |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 200 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.7V~5.5V |
| Rds On (Typ) | 77mOhm |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC94062YC6-TR Overview
It is package in Tape & Reel (TR) case.It is included in the package 6-TSSOP, SC-88, SOT-363.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.The temperature should be set to -40°C~125°C TA to ensure reliable functioning.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.The lighting driver has Slew Rate Controlled features.The MIC94062 family contains this object.For operation, we use the 6 pins.This LED driver has a maximum output of 2AV.The maximum output current must drop to 2A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 77mOhm ohms.When this is the case, the output current is set to 2A.There are a total of 1 channels available.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.There is a maximum input voltage of 5.5V volts.A voltage of 1.7V volts is the minimum input voltage.Stable operation is possible with a maximum operating temperature of 125°C°C.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.It can also be used at 1.7Vvolts if needed.There are 1 inputs available.
MIC94062YC6-TR Features
Resistance of 77mOhm
1 channels
MIC94062YC6-TR Applications
There are a lot of Microchip Technology MIC94062YC6-TR Power Switches ICs applications.
- PC Cards
- Notebook PC
- Set-Top Boxes
- Smartphone and PDA
- Gaming
- USB Protection
- Wearable Devices
- Storage Drives
- Set-top-box
- USB Ports/Hubs
