MIC94063YC6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Supplier Device Package | SC-70-6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 77mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Current Rating | 2A |
| Base Part Number | MIC94063 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.7V |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 200 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.7V~5.5V |
| Rds On (Typ) | 77mOhm |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC94063YC6-TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 6-TSSOP, SC-88, SOT-363.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~125°C TA in order to ensure reliable operation.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of P-Channel volts at its maximum output.Features of the lighting driver are Load Discharge, Slew Rate Controlled.It is part of the MIC94063 family of LED drivers.The operation is performed through the 6 pins.2AV is the maximum output of the LED driver.This results in the maximum output current dropping to 2A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.77mOhm is the resistance of the lighting driver.This case has the output current set to 2A.To choose from, there are 1 channels.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.The maximum input voltage is 5.5V volts.Input voltage must be at least 1.7V volts.A maximum operating temperature of 125°C°C is required to provide stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.5.5VV is the maximum supply voltage it can handle.If required, it can operate at 1.7V volts as well.There are 1 inputs available.
MIC94063YC6-TR Features
Resistance of 77mOhm
1 channels
MIC94063YC6-TR Applications
There are a lot of Microchip Technology MIC94063YC6-TR Power Switches ICs applications.
- Hard Disk Drives
- HDD and SSD
- Wearable Devices
- Telecom and Network Systems
- Portable Music Players
- Solid State Drivers
- PC Card Hot Swap
- PC Cards
- PDAs
- Wireless Headsets
