MIC94063YMT-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad, 4-TMLF® |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 110MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Current Rating | 2A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC94063 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.7V~5.5V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 85m Ω |
| Turn Off Time | 0.2 μs |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
MIC94063YMT-TR Overview
It is package in Tape & Reel (TR) case.Package 4-UFDFN Exposed Pad, 4-TMLF? contains it.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~125°C TA.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.Voltage output is P-Channel volts at maximum.Features of the lighting driver are Load Discharge, Slew Rate Controlled.It comes under the family of MIC94063.A total of 4 terminations can be found in it.For operation, 4 pins are used.The LED driver has 1 functions.The maximum output current is reduced to 2A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.It is positioned in the direction of Surface Mount.In this case, there is 110MOhm resistance in the LED driving board.The output current is set to 2A in this case.In this case, Vsup (maximum supply voltage) is set to 5.5V.
MIC94063YMT-TR Features
Supplied from 5V
Resistance of 110MOhm
MIC94063YMT-TR Applications
There are a lot of Microchip Technology MIC94063YMT-TR Power Switches ICs applications.
- Set-top-box
- Hard Disk Drives
- Portable GPS Device
- Gaming
- Portable Music Players
- Hot-Swap Systems
- Smartphone and PDA
- Handheld Devices
- PDAs
- Set-Top Boxes
