MIC94070YC6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Supplier Device Package | SC-70-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Resistance | 120mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC94070 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.7V |
| Current - Output (Max) | 1.2A |
| Output Configuration | High Side |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.7V~5.5V |
| Rds On (Typ) | 120mOhm |
| Drain to Source Resistance | 210mOhm |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MIC94070YC6-TR Overview
Tape & Reel (TR) is how it's packaged.The 6-TSSOP, SC-88, SOT-363 package includes it.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver has 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be achieved by this LED driver.As you can see, it comes from the MIC94070 family.In order to operate, 6 pins are used.In terms of output, the lighting driver can provide a maximum of 1.2A V.The maximum output current is reduced to 1.2A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.Currently, the LED driving board has 120mOhm resistance.This results in a 1.2A output current.A maximum input voltage of 5.5V volts can be applied to it.The input voltage minimum is 1.7V volts.Stable operation is possible with a maximum operating temperature of 125°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.This LED driving board can handle voltages up to 5.5VV.It can operate at low supply voltages, such as 1.7V volts.
MIC94070YC6-TR Features
Resistance of 120mOhm
MIC94070YC6-TR Applications
There are a lot of Microchip Technology MIC94070YC6-TR Power Switches ICs applications.
- PDAs
- Low Voltage I/O System Power
- Wireless Modem Data Cards
- PC Cards
- Portable/Handheld Devices
- Portable Music Players
- Portable GPS
- Solid State Drivers
- Set-Top Boxes
- Gaming
