banner_page

MIC94072YC6-TR

P-Channel PMIC MIC94072 6 Pin 6-TSSOP, SC-88, SOT-363


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC94072YC6-TR
  • Package: 6-TSSOP, SC-88, SOT-363
  • Datasheet: PDF
  • Stock: 737
  • Description: P-Channel PMIC MIC94072 6 Pin 6-TSSOP, SC-88, SOT-363 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-TSSOP, SC-88, SOT-363
Number of Pins 6
Supplier Device Package SC-70-6
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
Feature Slew Rate Controlled
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Resistance 170mOhm
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Current Rating 1.2A
Base Part Number MIC94072
Number of Outputs 1
Output Type P-Channel
Max Output Current 1.2A
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 1.7V
Current - Output (Max) 1.2A
Nominal Supply Current 1.2A
Output Configuration High Side
Output Current 1.2A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 1.5 μs
Switch Type General Purpose
Max Input Voltage 5.5V
Turn-Off Delay Time 200 ns
Ratio - Input:Output 1:1
Voltage - Load 1.7V~5.5V
Rds On (Typ) 120mOhm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC94072YC6-TR Overview


The LED driver's packaged as a Tape & Reel (TR).In the 6-TSSOP, SC-88, SOT-363 package, it is included.The LED driver is mounted as Surface Mount.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts has been specified.It has a total of Slew Rate Controlled features.It belongs to the family MIC94072.In order to operate, the 6 pins are used.This lighting driver is capable of delivering a maximum output of 1.2A volts.To meet the operation criteria, the maximum output current drops to 1.2A.The LED driving board is mounted in the way of Surface Mount.It has 170mOhm resistance.It is set to 1.2A in this case.As far as input voltage goes, its maximum is 5.5V volts.It is designed to be stable at 125°C°C, which is the maximum operating temperature.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.A maximum supply voltage of 5.5VV can be handled by the LED driving board.If required, it can operate at 1.7V volts as well.

MIC94072YC6-TR Features


Resistance of 170mOhm

MIC94072YC6-TR Applications


There are a lot of Microchip Technology MIC94072YC6-TR Power Switches ICs applications.

  • Gaming
  • PC Cards
  • Storage (HDDs, SSDs)
  • Set-top-box
  • USB3.1 Power Delivery
  • PDAs
  • Portable Music Players
  • Hot Swaps
  • Wireless Modem Data Cards
  • PC Card Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good