MIC94073YC6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Supplier Device Package | SC-70-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.2A |
| Base Part Number | MIC94073 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 1.2A |
| Current | 1.2A |
| Output Configuration | High Side |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.7V~5.5V |
| Rds On (Typ) | 120mOhm |
| Drain to Source Resistance | 210mOhm |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC94073YC6-TR Overview
A Tape & Reel (TR) is used to package it.It's included in the 6-TSSOP, SC-88, SOT-363 package.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.It is a member of the MIC94073 family.The 6 pins are used for the operation of the system.There is a maximum output of 1.2AV from the LED driver.This operation requires the maximum output current to be decreased to 1.2A.As a result, it is mounted in the manner of Surface Mount.Lighting drivers with 120mOhm resistance are used.The output current is set to 1.2A in this case.The maximum operating temperature of 125°C°C allows for stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.
MIC94073YC6-TR Features
Resistance of 120mOhm
MIC94073YC6-TR Applications
There are a lot of Microchip Technology MIC94073YC6-TR Power Switches ICs applications.
- Hot Swap
- Various applications equipped with buttons
- Set-top-box
- PDAs
- Storage Drives
- Handheld Devices
- Set-Top Boxes
- Gaming
- Hot-Swap Systems
- USB Protection
