MIC94082YFTTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 4 |
| Packaging | Cut Tape |
| Published | 2011 |
| Part Status | Active |
| Resistance | 115mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Current Rating | 2A |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.7V |
| Nominal Supply Current | 2A |
| Output Configuration | High Side |
| Current - Output | 2A |
| Turn On Delay Time | 1.5 μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 200 ns |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MIC94082YFTTR Overview
There is a Cut Tape-shaped package for it.A 4 pin is used for operation.There is a Surface Mount-axis orientation to it.Operating at 125°C°C allows for stable operation.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.By default, it is set to output 1.5.5VV is the maximum supply voltage it can handle.Using low supply voltages, such as 1.7VV, is feasible.In order to meet the operation criteria, the maximum output current has to be reduced to 2A.Devices have 115mOhm resistance.
MIC94082YFTTR Features
MIC94082YFTTR Applications
There are a lot of Micrel MIC94082YFTTR hot swap controllers applications.
- Distributed power systems
- Load transient protection
- Base station
- Comprehensive analog and digital capabilities
- Networking
- Identify faulty boards
- Overvoltage protection
- Board or blade insertion into live backplanes
- Telecommunications
- PC board hot swap insertion and removal
