MIC94091YC6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Supplier Device Package | SC-70-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Feature | Load Discharge |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 225mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.2A |
| Base Part Number | MIC94091 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.7V |
| Current - Output (Max) | 1.2A |
| Nominal Supply Current | 1.2A |
| Current | 1.2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 200 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.7V~5.5V |
| Rds On (Typ) | 130mOhm |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC94091YC6-TR Overview
A Tape & Reel (TR) is used to package it.The 6-TSSOP, SC-88, SOT-363 package includes it.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.By default, it is set to output 1.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is P-Channel volts.A lighting driver with Load Discharge features is available.It belongs to the family MIC94091.In order to operate, 6 pins are used.Its maximum output voltage is 1.2AV.To comply with the operation criteria, the maximum output current is reduced to 1.2A.It is positioned in the direction of Surface Mount.In this LED driving board, there is 225mOhm resistance.For stable operation, the maximum operating temperature should be 125°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.It can work with as low a supply voltage as feasible, such as 1.7VV.
MIC94091YC6-TR Features
Resistance of 225mOhm
MIC94091YC6-TR Applications
There are a lot of Microchip Technology MIC94091YC6-TR Power Switches ICs applications.
- Solid-State Drives
- PDAs
- Wireless Headsets
- Hot-Swap Systems
- Smart Phones, Feature Phones
- Hot Swap
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- USB Power Distribution
- Wearable Devices
