MIC94300YMT-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad, 4-TMLF® |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Ripple Blocker™ |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MIC94300 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 3.6V |
| Voltage | 3.6V |
| Interface | On/Off |
| Current | 200mA |
| Output Configuration | High Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~3.6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 550μm |
| Length | 1.6mm |
| Width | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MIC94300YMT-T5 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).Package 4-UFDFN Exposed Pad, 4-TMLF? contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.By default, it is set to output 1.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.I believe it belongs to the MIC94300 family.As a result, there are 4 terminations.During operation, the 4 pins are used.Currently, the lighting driver has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 200mA.Surface Mount is mounted in the way of this LED driving board.Electrical components such as this are included in the Ripple Blocker? series.This case has the output current set to 200mA.The supply voltage should be set at 3.6V for best efficiency.1μA is the maximum current required to operate it.
MIC94300YMT-T5 Features
MIC94300YMT-T5 Applications
There are a lot of Microchip Technology MIC94300YMT-T5 Power Switches ICs applications.
- PDAs
- Hot-Swap Systems
- Handheld Devices
- USB Power Distribution
- Portable Video Game Players
- HDD, SSD
- USB Protection
- Portable GPS Device
- Portable/Handheld Devices
- Wireless Headsets
