MIMXRT1051CVL5B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 196-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2016 |
| Series | RT1050 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Additional Feature | 24MHZ NOMINAL CRYSTAL FREQUENCY AVAILABLE |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-PBGA-B196 |
| Supply Voltage-Max (Vsup) | 1.26V |
| Supply Voltage-Min (Vsup) | 1.15V |
| Oscillator Type | Internal/External |
| Number of I/O | 127 |
| Speed | 528MHz |
| RAM Size | 512K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | External Program Memory |
| Core Size | 32-Bit |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, MMC/SD/SDIO, SAI, SPDIF, SPI, UART/USART, USB OTG |
| Data Converter | A/D 20x12b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Height Seated (Max) | 1.52mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
MIMXRT1051CVL5B Description
The I.MX RT1050 is a new processor family that uses NXP's advanced implementation of the ARM Cortex - M7 core at speeds up to 528 MHz, providing high CPU performance and the best real-time response. The IMX RT1050 processor has the on-chip RAM of 512KB, which can be flexibly configured as Tcm or general-purpose on-chip RAM. I.MX RT1050 integrates advanced power management modules with DCDC and LDO, reducing the complexity of external power supplies and simplifying power sequencing. IMX RT1050 also provides a variety of memory interfaces, including SDRAM, raw NAND flash, NOR flash, SD/eMMC, quad SPI, and a variety of other interfaces for connecting peripherals, such as wireless local area networks, Bluetooth sensors, global positioning systems, monitors, and camera sensors. IMX RT1050 also has rich audio and video functions, including LCD display, basic 2D graphics, camera interface, SPDIF and I2S audio interface.
MIMXRT1051CVL5B Features
The i.MX RT1050 processors are based on Arm Cortex-M7 MPCore? Platform, which has the
following features:
? Supports single Arm Cortex-M7 MPCore with:
— 32 KB L1 Instruction Cache
— 32 KB L1 Data Cache
— Full featured Floating Point Unit (FPU) with support of the VFPv5 architecture
— Support the Armv7-M Thumb instruction set
? Integrated MPU, up to 16 individual protection regions
? Up to 512 KB I-TCM and D-TCM in total
? Frequency of 528 MHz
? Cortex M7 CoreSight? components integration for debug
? Frequency of the core, as per Table 10, "Operating ranges," on page 20.
The SoC-level memory system consists of the following additional components:
— Boot ROM (96 KB)
— On-chip RAM (512 KB)
– Configurable RAM size up to 512 KB shared with M7 TCM
? External memory interfaces:
— 8/16-bit SDRAM, up to SDRAM-166
— 8/16-bit SLC NAND FLASH, with ECC handled in software
— SD/eMMC
— SPI NOR FLASH
— Parallel NOR FLASH with XIP support
— Single/Dual channel Quad SPI FLASH with XIP support
? Timers and PWMs:
— Two General Programmable Timers (GPT)
– 4-channel generic 32-bit resolution timer
– Each support standard capture and compare operation
— Four Periodical Interrupt Timer (PIT)
– Generic 16-bit resolution timer
MIMXRT1051CVL5B Applications
rich audio
video functions
LCD display
basic 2D graphics
camera interface
