MK03-1C90C-500W
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | Molded Body |
| Surface Mount | NO |
| Mounting Feature | PANEL MOUNT |
| Number of Pins | 2 |
| Actuator Material | Magnet |
| Operating Temperature | -30°C~70°C TA |
| Published | 2010 |
| Series | MK03 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire Leads |
| Type | Reed Switch |
| Voltage - Rated | 175V |
| Current Rating | 250mA |
| Termination Style | Wire Leads |
| Body Length or Diameter | 5.8mm |
| Output Type | SPDT |
| Operating Supply Voltage | 200V |
| Nominal Supply Current | 1.2A |
| Sensing Distance | 25 mm |
| Sensing Method | Magnetic |
| Housing | PBT FIBERGLASS REINFORCED |
| Must Operate | 15 ~ 40AT |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MK03-1C90C-500W Overview
Modules of magnetic position sensors are packaged in Molded Body packages. The sensors modules have 2 pins. If the magnetic position sensors are operating, their supply voltage should be 200V. There will generally be 1.2A current drawn by this sensors module.
MK03-1C90C-500W Features
Package / Case: Molded Body
MK03 Series
Operating Temperature: -30°C~70°C TA
2 Pins
Operating Supply Voltage: 200V
MK03-1C90C-500W Applications
There are a lot of Standex-Meder Electronics MK03-1C90C-500W Magnetic Position Sensors Modules applications.
- Identification of magnetic patterns in cards and banknotes
- Electric window lift
- RPM measurement
- Reed switch replacement
- Synchronization
- Speedometers
- White goods
- Angle sensing
- Flow-rate sensing
- Exercise equipment
