MK10DX256VLH7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | Kinetis K10 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MK10DX256 |
| JESD-30 Code | S-PQFP-G64 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.71V |
| Oscillator Type | Internal |
| Number of I/O | 44 |
| Speed | 72MHz |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.71V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | DMA, I2S, LVD, POR, PWM, WDT |
| Clock Frequency | 50MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, EBI/EMI, I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 39mA |
| Bit Size | 32 |
| Data Converter | A/D 26x16b; D/A 1x12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| EEPROM Size | 2K x 8 |
| CPU Family | CORTEX-M4 |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
MK10DX256VLH7 Description
The MK10DX256VLH7 is a 32-bit Kinetis K1x Baseline Microcontroller with an ARM Cortex-M4 RISC architecture core that operates at 72MHz. The MK10DX256VLH7 has 288kB of internal flash memory, 66kB of internal RAM, 2kB of EEPROM, two 16-bit SAR A/D converters, and one 12-bit D/A converter, and 56 general-purpose I/O connectors. This MK10DX256VLH7 also has four UART modules, two SPI modules, two I2C modules, and one I2S module for communication.
MK10DX256VLH7 Features
Software watchdog
Low-leakage wakeup unit
Hardware CRC module to support fast cyclic redundancy checks
128-bit Unique identification (ID) number per chip
Low-power hardware touch sensor interface (TSI)
General-purpose input/output
Three analogue comparators (CMP) containing a 6-bit DAC and programmable reference input
Voltage reference
Programmable delay block
Eight channel motor control/general purpose/PWM timers
Two 2-channel quadrature decoder/general purpose timers
Periodic interrupt timers
16-bit Low-power timer
Carrier modulator transmitter
Real-time clock
3 to 32MHz Crystal oscillator
Multi-purpose clock generator
Multiple low-power modes to provide power optimization based on application requirements
16-channel DMA controller, supporting up to 128 request sources
External watchdog monitor
MK10DX256VLH7 Applications
Industrial
