MK13-1B90C-500W
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | Molded Body |
| Actuator Material | Magnet |
| Operating Temperature | -30°C~70°C TA |
| Packaging | Bulk |
| Published | 2010 |
| Series | MK13 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire Leads |
| Type | Reed Switch |
| Voltage - Rated DC | 175V |
| Reach Compliance Code | unknown |
| Current Rating | 250mA |
| Termination Style | Wire Leads |
| Output Type | SPST-NC |
| Operating Supply Voltage | 175V |
| Nominal Supply Current | 1A |
| Throw Configuration | SPST |
| Sensing Method | Magnetic |
| Must Operate | 15 ~ 40AT |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MK13-1B90C-500W Overview
Magnetic position sensors are packaged in Molded Body packages. As a protective measure, the electronics are packaged in the Bulk to ensure their safety. During operation, the magnetic position sensors modules should apply a voltage of 175V. This sensor module generally draws 1A current. It is recommended that the rated voltage for sensor modules be set to 175V in the DC circuit.
MK13-1B90C-500W Features
Package / Case: Molded Body
MK13 Series
Operating Temperature: -30°C~70°C TA
Operating Supply Voltage: 175V
MK13-1B90C-500W Applications
There are a lot of Standex-Meder Electronics MK13-1B90C-500W Magnetic Position Sensors Modules applications.
- Synchronization
- Monitor protections of the safety gates
- Medication dispensing control
- Geomagnetic field measurements
- Spindles
- Localization of ferromagnetic
- Anti-lock braking systems
- Angle sensing
- Mixers
- Flow-rate sensing
