MK21-1A66B-500W
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | Molded Body |
| Actuator Material | Magnet |
| Operating Temperature | -30°C~150°C TA |
| Packaging | Bulk |
| Published | 2014 |
| Series | MK21 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire Leads |
| Type | Reed Switch |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -20°C |
| Voltage - Rated DC | 180V |
| Current Rating | 500mA |
| Termination Style | Wire Leads |
| Output Type | SPST-NO |
| Operating Supply Voltage | 200V |
| Nominal Supply Current | 1.25A |
| Sensing Method | Magnetic |
| Must Operate | 10 ~ 60AT |
| Must Release | 4 ~ 54AT |
| RoHS Status | RoHS Compliant |
MK21-1A66B-500W Overview
Molded Body packages are used for the magnetic position sensor modules. It is possible to set the minimum operating temperature for magnetic position sensors to -20°C. If you want the sensor module to perform properly, you must keep the operating temperature below 150°C. The Bulk package protects the devices from damage during transportation. During operation, the magnetic position sensors module should be supplied with a voltage of 200V. Sensor modules draw 1.25A current in general. When a sensor module is used in a DC circuit, the rated voltage should be 180V.
MK21-1A66B-500W Features
Package / Case: Molded Body
MK21 Series
Operating Temperature: -30°C~150°C TA
Operating Supply Voltage: 200V
MK21-1A66B-500W Applications
There are a lot of Standex-Meder Electronics MK21-1A66B-500W Magnetic Position Sensors Modules applications.
- Identification of magnetic patterns in cards and banknotes
- Position and limit sensing
- Fan speed measurement
- Generator set
- Reed switch replacement
- Navigation
- Localization of ferromagnetic
- Monitor protections of the safety gates
- End of travel and index sensors
- Compressor speed
