MK21M-1A66C-500W
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | Molded Body |
| Surface Mount | NO |
| Mounting Feature | PANEL MOUNT |
| Actuator Material | Magnet |
| Operating Temperature | -30°C~150°C TA |
| Series | MK21 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire Leads |
| Type | Reed Switch |
| Reach Compliance Code | unknown |
| Termination Style | Wire Leads |
| Body Length or Diameter | 28.6mm |
| Body Breadth | 19 mm |
| Output Type | SPST-NO |
| Operating Supply Voltage | 200V |
| Nominal Supply Current | 1.25A |
| Response Time | 100 μs |
| Sensing Method | Magnetic |
| Housing | EPOXY RESIN |
| Must Operate | 10 ~ 60AT |
| Must Release | 4 ~ 54AT |
| Body Height | 6.35mm |
| RoHS Status | ROHS3 Compliant |
MK21M-1A66C-500W Overview
Molded Body packages are used to package the magnetic position sensor modules. If the magnetic position sensors are to function, the supply voltage applied by them should be 200V. Sensor modules in general draw 1.25A current.
MK21M-1A66C-500W Features
Package / Case: Molded Body
MK21 Series
Operating Temperature: -30°C~150°C TA
Operating Supply Voltage: 200V
Response Time: 100 μs
MK21M-1A66C-500W Applications
There are a lot of Standex-Meder Electronics MK21M-1A66C-500W Magnetic Position Sensors Modules applications.
- Process speed
- Fan speed measurement
- Shafts in transmissions, hydraulic motors, pumps and gear boxes
- Angle sensing
- Reed switch replacement
- Position tracking
- Navigation
- Gear reducer RPM
- Generator set
- Position and limit sensing
