MK21P-1A66B-500W
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | Molded Body |
| Actuator Material | Magnet |
| Operating Temperature | -30°C~150°C TA |
| Published | 2006 |
| Series | MK21 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire Leads |
| Type | Reed Switch |
| Termination Style | Wire Leads |
| Output Type | SPST-NO |
| Lead Length | 500mm |
| Operating Supply Voltage | 200V |
| Contact Resistance | 150mOhm |
| Insulation Resistance | 100MOhm |
| Operating Supply Current | 1.25A |
| Nominal Supply Current | 500mA |
| Max Voltage Rating (DC) | 200V |
| Response Time | 100 µs |
| Switching Voltage | 200V |
| Sensing Method | Magnetic |
| Housing | CRASTIN SK655FR1 |
| Must Operate | 10 ~ 60AT |
| Must Release | 4 ~ 54AT |
| Height | 6.35mm |
| Length | 28.6mm |
| Width | 19mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MK21P-1A66B-500W Overview
The magnetic position sensor modules are put into Molded Body packages. When the magnetic position sensors modules are operating, the supply voltage should be 200V. The current drawn by the magnetic position sensors modules could be 1.25A. Generally, these sensors modules draw 500mA current.
MK21P-1A66B-500W Features
Package / Case: Molded Body
MK21 Series
Operating Temperature: -30°C~150°C TA
Operating Supply Voltage: 200V
Operating Supply Current: 1.25A
Response Time: 100 μs
MK21P-1A66B-500W Applications
There are a lot of Standex-Meder Electronics MK21P-1A66B-500W Magnetic Position Sensors Modules applications.
- Medication dispensing control
- Speed and direction of gears
- Generator set
- Mixers
- Magnetic encoders
- Fan speed measurement
- Industrial controls
- Transmission
- Process speed
- Encoders
