Parameters | |
---|---|
Mounting Type | Surface Mount |
Package / Case | 64-LQFP |
Surface Mount | YES |
Operating Temperature | -40°C~105°C TA |
Packaging | Tray |
Published | 2013 |
Series | Kinetis K20 |
JESD-609 Code | e3 |
Part Status | Not For New Designs |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 64 |
ECCN Code | 3A991.A.2 |
Terminal Finish | Matte Tin (Sn) |
HTS Code | 8542.31.00.01 |
Subcategory | Microcontrollers |
Technology | CMOS |
Terminal Position | QUAD |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Time@Peak Reflow Temperature-Max (s) | 40 |
Base Part Number | MK22FN1M0 |
JESD-30 Code | S-PQFP-G64 |
Qualification Status | Not Qualified |
Supply Voltage-Max (Vsup) | 3.6V |
Power Supplies | 1.8/3.3V |
Supply Voltage-Min (Vsup) | 1.71V |
Oscillator Type | Internal |
Number of I/O | 40 |
Speed | 120MHz |
RAM Size | 128K x 8 |
Voltage - Supply (Vcc/Vdd) | 1.71V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Core Processor | ARM® Cortex®-M4 |
Peripherals | DMA, I2S, LVD, POR, PWM, WDT |
Clock Frequency | 50MHz |
Program Memory Type | FLASH |
Core Size | 32-Bit |
Program Memory Size | 1MB 1M x 8 |
Connectivity | CANbus, EBI/EMI, I2C, IrDA, SPI, UART/USART, USB, USB OTG |
Supply Current-Max | 50.1mA |
Bit Size | 32 |
Data Converter | A/D 22x16b; D/A 1x12b |
Has ADC | YES |
DMA Channels | YES |
PWM Channels | YES |
DAC Channels | YES |
ROM (words) | 1048576 |
CPU Family | CORTEX-M4F |
Length | 10mm |
Width | 10mm |
RoHS Status | ROHS3 Compliant |
The MK22FN1M0VLH12 is a Kinetis? K22-120 MHz, Cost Effective, Full-Speed USB Microcontrollers (MCUs) based on Arm? Cortex?-M4 Core. The K22 product family members are designed for low-power, USB connectivity, efficient processing with floating point units, and cost-sensitive applications. It is scalable and has all the capabilities of the Kinetis family. This item provides:
Flash memory with a maximum capacity of 1 MB and 128 KB of SRAM
Miniaturized device with high memory density
Reduce energy usage to 279 A/MHz. With full state retention and a 5-second awakening, static power consumption is as low as 5.1 A. Down to 268 nA in the lowest static mode
Embedded 3.3 V, 120 mA LDO voltage regulator in USB LS/FS OTG 2.0
Communication interfaces
USB full-/low-speed On-the-Go controller
USB Device Charger detect
Controller Area Network (CAN) module
One SPI module
Three I2C modules
Three UART modules
Secure Digital host controller (SDHC)
I2S module
Timers
Two 8-channel Flex-Timers (PWM/Motor Control)
Two 2-channel Flex-Timers (PWM/Quad Decoder)
Periodic interrupt timers and 16-bit low-power timer
Carrier modulator transmitter
Real-time clock
Programmable delay block
Clocks
3 to 32 MHz and 32 kHz crystal oscillator
PLL, FLL, and multiple internal oscillators
Operating Characteristics
Voltage range: 1.71 to 3.6 V
Flash write voltage range: 1.71 to 3.6 V
Temperature range (ambient): –40 to 105°C
Performance
Up to 120 MHz ARM Cortex-M4-based core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
Memories and memory interfaces
Up to 1 MB program flash memory and 128 KB RAM
Up to 128 KB FlexNVM and 4 KB FlexRAM on
FlexMemory devices
FlexBus external bus interface
System peripherals
Multiple low-power modes; low leakage wakeup unit
Memory protection unit with multi-master protection
16-channel DMA controller
External watchdog monitor and software watchdog
Security and integrity modules
Hardware CRC module
128-bit unique identification (ID) number per chip
Analog modules
Two 16-bit SAR ADCs
Two 12-bit DACs
Three analog comparators (CMP)
Voltage reference
Industrial
Air Conditioning (AC)
Anesthesia Unit Monitor
Blood Glucose Management
Continuous Positive Airway Pressure Machine (CPAP)
Defibrillator
Digital Stethoscope
Heart Monitors
Heat Metering
Home Health Gateway
Hospital Admission Machine
Industrial HMI
Medical Imaging
Powered Patient Beds
Smart Power Socket and Light Switch
Vital Signs Monitors