MK3732-22RLF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Clock Generators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, OTHER |
| Frequency (Max) | 33MHz |
| Input | Crystal |
| Primary Clock/Crystal Frequency-Nom | 13.5MHz |
| PLL | Yes |
| Output Clock Frequency-Max | 26.8MHz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
MK3732-22RLF Overview
An accompanying case is included. As far as terminations are concerned, there are 20. The part provides a voltage of 3.3V volts. This part's peak reflow temperature is utilized to run 260. This device contains CLOCK GENERATOR, OTHER uPs, uCs, or peripheral ICs. In the device, there are 1. The maximum frequency for normaloperation is 33MHz. Clock program is important that the clock's output frequency does not exceed 26.8MHz. Of the part, there are 1999 publications. Ideally, it should be mounted with Surface Mount. 20 pins are present on the device. The board has 20 pins. Circuits application is essential that the minimum working temperature of this device not be below 0°C. There should be a temperature below 70°C during operation. You should maintain a voltage of 3.3V for the supply. Circuits application is a member of the Clock Generators family. As far as supply voltage is concerned, this part is used at 3.45V. To maintain a supply voltage greater than 3.15V on the device.
MK3732-22RLF Features
Peak Reflow Temperature (Cel): 260
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, OTHER
Include 1 Circuits
with 20 Pins
operate supply voltage at the range of 3.3V
MK3732-22RLF Applications
There are a lot of Integrated Device Technology (IDT) MK3732-22RLF application specific timer?applications.
- Test and Measurement
- Ethernet switch/router
- Routers
- Telecom line cards
- OTN Muxponders and Transponders
- PCI Express 2.0/3.0
- Ethernet Switches, Routers
- XO replacement
- Servers
- Servers, storage
