MKL25Z128VFT4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | Kinetis KL2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | 3A991.A.2 |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MKL25Z128 |
| JESD-30 Code | S-XQCC-N48 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.71V |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| Speed | 48MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.71V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, LVD, POR, PWM, WDT |
| Clock Frequency | 48MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB, USB OTG |
| Supply Current-Max | 7.8mA |
| Bit Size | 32 |
| Data Converter | A/D 13x16b; D/A 1x12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 131072 |
| CPU Family | CORTEX-M0 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
MKL25Z128VFT4 Description
The MKL25Z128VFT4 is a 32-bit Kinetis KL2x Ultra-low-power Microcontroller with USB control that is based on the ARM Cortex-M0+ RISC architecture core and operates at a maximum frequency of 48MHz. The MKL25Z128VFT4 has 128kB internal flash, 16kB internal RAM, one 16-bit SAR A/D converter, one 12-bit D/A converter, general purpose PWM, and 36 general-purpose I/O pins. This device also includes communication interfaces such as three UART modules, two SPI modules, and two I2C modules.
MKL25Z128VFT4 Features
SWD debug interface and micro trace buffer
Bit manipulation engine
Multi-purpose clock source
1kHz LPO clock
Low-power hardware touch sensor interface (TSI)
USB Full-/low-speed on-the-go controller with on-chip transceiver and 5V to 3.3V regulator
Analog comparator (CMP) containing a 6-bit DAC and programmable reference input
6-channel Timer/PWM (TPM)
Two 2-channel Timer/PWM module
Periodic interrupt timers
16-bit Low-power timer (LPTMR)
Real-time clock
80-bit Unique identification number per chip
48MHz ARM Cortex-M0+ core
Nine low-power modes to provide power optimization based on application requirements
COP software watchdog
4-channel DMA controller, supporting up to 63 request sources
Low-leakage wakeup unit
MKL25Z128VFT4 Applications
Industrial
Automation & Process Control
