MKL26Z128VLL4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | Kinetis KL2 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MKL26Z128 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.71V |
| Oscillator Type | Internal |
| Number of I/O | 84 |
| Speed | 48MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.71V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LVD, POR, PWM, WDT |
| Clock Frequency | 48MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB, USB OTG |
| Supply Current-Max | 8.3mA |
| Bit Size | 32 |
| Data Converter | A/D - 16bit; D/A - 12bit |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 131072 |
| CPU Family | CORTEX-M0 |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
MKL26Z128VLL4 Overview
MKL26Z128VLL4 MCU is packaged in a 100-LQFP format. With 84 I/Os, it's pretty good. Using the Mounting Type Surface Mount, the MCU is mounted on PCB. As the name implies, this Microcontroller is based on a 32-Bit core. There is a memory type of FLASH in its program memory. There is a temperature range of -40°C~105°C TA for this Microcontroller. An electrical component of this type belongs to the Kinetis KL2 series. This program memory has a size of 128KB 128K x 8, which indicates what the size of the program memory is. A ARM? Cortex?-M0+ Core Processor is at the core of this Microcontroller. The device belongs to MICROCONTROLLER, RISC uPs/uCs/Peripheral ICs Type. During the manufacturing process, 100 terminations were applied to the IC chip. The microcontroller comes in a 32-bit size. There is a 3.3V volt supply output on the chip. In addition to that, the MCU chip has YES DMA channels. The base part number MKL26Z128 MCU can be used to find alternatives. Using YES PWM channels, the device works. This Microcontroller is embedded with a CORTEX-M0 processor family, which is a powerful and efficient CPU. In terms of frequency, it operates at a 48MHz clock rate.
MKL26Z128VLL4 Features
Performance
? 48 MHz ARM? Cortex?-M0+ core
Memories and memory interfaces
? Up to 256 KB program flash memory
? Up to 32 KB SRAM
System peripherals
? Nine low-power modes to provide power optimization
based on application requirements
? COP Software watchdog
? 4-channel DMA controller, supporting up to 63 request
sources
? Low-leakage wakeup unit
? SWD debug interface and Micro Trace Buffer
? Bit Manipulation Engine
Clocks
? 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator
? Multi-purpose clock source
Operating Characteristics
? Voltage range: 1.71 to 3.6 V
? Flash write voltage range: 1.71 to 3.6 V
? Temperature range (ambient): -40 to 105°C
Human-machine interface
? Low-power hardware touch sensor interface (TSI)
? Up to 84 general-purpose input/output (GPIO)
Communication interfaces
? USB full-/low-speed On-the-Go controller with the on-chip transceiver and 5 V to 3.3 V regulator
? Two 16-bit SPI modules
? I2S (SAI) module
? One low-power UART module
? Two UART modules
? Two I2C module
Analog Modules
? 16-bit SAR ADC
? 12-bit DAC
? Analog comparator (CMP) containing a 6-bit DAC
and programmable reference input
Timers
? Six channel Timer/PWM (TPM)
? Two 2-channel Timer/PWM modules
? Periodic interrupt timers
? 16-bit low-power timer (LPTMR)
? Real-time clock
MKL26Z128VLL4 Applications
There are a lot of NXP USA Inc. MKL26Z128VLL4 Microcontroller applications. MKL26Z128VLL4 MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.
Process control devices
Coffee machines
Smart instruments
Routers
Mice
Xbox
Computers
Vacuum cleaners
Teletext terminals
Smart highways
